S.S. Enterprises

The hydraulic jack of 2000 kN capacity is fixed to base. The upper plate has got a self aligning action and is attached to a screw which passes through the cross head and can be raised for lowered for initial clearance adjustment. The lower plate rests on the jack ram and is positioned with the help of a centering pin. Loading is accomplished by the upward movement of the lower plate.

The motorized pumping unit which is housed in an elegant console is of double plunger type and is driven by 3 phase 440 volts 50 cycles electric motor. The pumping unit is separate unit connected to the jack by means of a steel connecting tube. A junction box is suitably fixed to connect the motor to the mains through a push button starter. The pumping unit is fitted with gauges. A maximum pointer is provided to facilitate taking of the reading after failure of the specimen. The pressure gauges are fixed on the pumping unit at an angle for easy readability. The machine is fitted with a hand wheel control which enables the rate of application of load to be varied. The machine is also equipped with facilities for hand pumping in case of power failure. The electric pumping unit is fixed with a micro-switch off the motor automatically as the load on the machine approaches the rated capacity. Relays are also incorporated in the pumping unit so that in the case of break-down of power supply, the motor will stop and would not-re-start unless starting switch is operated.

S. S. Enterprises is a foremost manufacturer, wholesaler & retailer of Soil Testing Equipment, Bitumen And Asphalt & Aggregate Testing Equipment & Cube Testing Machine and many more. Since 2016, our company is engaged in this occupation as a Sole Proprietorship entity at Hari Nagar, Delhi. The products we are offering are well-known for their remarkable quality and remarkable functionality.

Standards:IS 1199-1959, IS 4031 1968 BS 1881, ASTM C 151, C490.
Specification:
The instrument consists of a channeled or a round base over which two vertical pillars are fixed. An adjustable cross plate is at the top. A dial gauge, reading to .002mm x 5mm. Can be located upon a 6.5mm. dia ball or other reference point cemented in the specimen. On the base there is similar recessed seating in which can be placed a second ball or reference point in the specimen. Complete with a stainless steel standardization bar with insulated grip and with 6.5mm dia. Balls mounted in the ends.The unit can be supplied with an Electronic Dial Gauge at extra cost if indicated at the time of placing the order.

• Specification: The concrete permeability apparatus comprises of a brass/ gunmetal cell of squares cross section mounted on a stand and a pressure chamber is connected to the cell through copper tubing and T-connector mounted on the stand with sleeve packed valve and rubber hose pipe with end connections. The cell assembly consists of one base plate, one metal funnel and one top plate, and a pressure tube is supplied to develop pressure in the chamber. The apparatus is supplied with a measuring cylinder 500cc to measure percolated quantity of water. Pressure can also be applied by a pressure air line or by a compressor.
• Available for sample of size 150mm dia X 150mm high.
• Available for sample of size 100mm dia X 100mm high.